Renseignements généraux

Nº de série

73300 451104

Nº de partie

1

Nombre total de parties

1

Ou

S/O

Brevets

S/O

Description générale

ENAMELLED PRESSED METAL HOUSING/ METAL BURNER GRATES, BURNERS, WICK TUBES & FUEL BOTTLE BRACKETS/ SYNTHETIC DOOR HANDLES & BURNER CONTROL KNOBS/ GLASS FUEL BOTTLES & THERMOMETER FACE/ CHROME PLATED METAL THERMOMETER SURROUND

Dimensions

Remarque : Cette information reflète la taille générale pour l’entreposage et ne représente pas nécessairement les véritables dimensions de l’objet.

Longueur

54,6 cm

Largeur

82,5 cm

Hauteur

110,0 cm

Épaisseur

S/O

Poids

S/O

Diamètre

S/O

Volume

S/O

Lexique

Groupe

Technologie domestique

Catégorie

Traitement de nourriture

Sous-catégorie

S/O

Fabricant

Ou

Sears

Pays

United States of America

État/province

Inconnu

Ville

Inconnu

Contexte

Pays

Inconnu

État/province

Inconnu

Période

Inconnu

Canada

Inconnu

Fonction

Inconnu

Technique

Inconnu

Notes sur la région

Inconnu

Détails

Marques

MFR'S PLATE READS: 'IN ALL CORRESPONDENCE REGARDING/ THIS ARTICLE ALWAYS MENTION/ MODEL NUMBER 123 73300 451104/ ORDER REPLACEMENT PARTS BY MAIL OR/ THROUGH ANY OF OUR RETAIL STORES/ SEARS, ROEBUCK AND CO. USA.'/ 'PATENT 2.444.862' WRITTEN BELOW MFR'S PLATE/ 'OFF/ LIGHT' STAMPED INTO CONTROL KNOB MOUNTS/ OVEN DOOR THERMOMETER READS: '300 400 500/ HOT MED SLOW'/ 'KENMORE' PLATE MOUNTED ON BACKSPLASH/ MARKINGS FOR OPERATING INSTRUCTIONS: STICKER ON BACK OF LID OVER FUEL RECEPTACLE READS: ‘FOR GOOD PERFORMANCE/ 1. LOCATION - Place range 4" away from any wall at back/ and side./ 2. RANGE MUST BE SET LEVEL - Place level on channel in upper/ burner chamber at ‘Level here' to level front to back, and on/ front channel just inside lower oven burner door to level side to/ side. If range is moved it must be re-leveled. Oil in flooded/ burner bowl must not exceed 1/4"./ 3. USE GOOD KEROSENE - Kerosene must be water white./ Strain through filter funnel or chamois to eliminate dirt and water./ 4. USE PROPER KINDLERS - 1 3/8" for all burners./ 5. KEEP RANGE CLEAN - Do not allow dirt to accumulate in/ or around burners, oil well or fuel lines'./ LIGHTING INSTRUCTIONS ENAMELED ON INSIDE OF CONTROL ACCESS PANEL READ: ‘LIGHTING INSTRUCTIONS FOR SURFACE AND OVEN BURNERS/ 1. TURN BURNER KNOBS TO LIGHT POSITION AND ALLOW LIGHTING RING TO BECOME SATURATED/ WITH OIL./ 2. TURN KNOB TO BURN POSITION, LIFT BURNER DRUM, LIGHT RING IN SEVERAL PLACES, AND/ RESEAT BURNER DRUM./ 3. WHEN FLAME LEVELS OFF ADJUST KNOB FOR AMOUNT OF HEAT REQUIRED./ 4. TO SHUT OFF BURNER TURN KNOB TO OFF POSITION./ KEEP THIS DOOR OPEN WHILE BURNERS ARE IN USE.'/ MARKINGS INSIDE OVEN CONTROL ACCESS PANEL READ: ‘KEEP THIS DOOR OPEN WHILE/ OVEN BURNER IS IN USE.'

Manque

OVEN RACKS From CA of 09/06/1994 by Tony Missio: No - Complete

Fini

HOUSING METAL WITH WHITE ENAMEL FINISH (EXTERIOR) & BLACKENAMEL FINISH (INTERIOR)/ GRATES, WICK TUBES & FUEL BOTTLES BRACKETS METAL JAPANNED? BLACK/ DOOR HANDLES WHITE SYNTHETIC/BURNER CONTROL KNOBS BLACK SYNTHETIC

Décoration

PARALLEL HORIZONTAL RIDGES ON DROP DOWN PANELS AT FRONT TOP & BOTTOM, & ON BACKSPLASH