Renseignements généraux

Nº de série

S/O

Nº de partie

1

Nombre total de parties

1

Ou

S/O

Brevets

S/O

Description générale

Card stock

Dimensions

Remarque : Cette information reflète la taille générale pour l’entreposage et ne représente pas nécessairement les véritables dimensions de l’objet.

Longueur

8,0 cm

Largeur

13,1 cm

Hauteur

S/O

Épaisseur

S/O

Poids

S/O

Diamètre

S/O

Volume

S/O

Lexique

Groupe

Imprimerie

Catégorie

Specimens imprimes

Sous-catégorie

S/O

Fabricant

Ou

Inconnu

Pays

Inconnu

État/province

Inconnu

Ville

Inconnu

Contexte

Pays

Inconnu

État/province

Inconnu

Période

Inconnu

Canada

Many of the plates, proofs, labels and posters were produced for Canada's growing number of manufacturers in everything from farm implements, to preserved food, pharmaceuticals and musical instruments. Some of these, like Massey Harris, were once giants. Others may have left no other traces than the plate and proof for a cheque, receipt or letterhead. The artifacts and print specimens represent the output of one of the fastest growing industries in this period: printing and graphic arts. Not only was printing growing rapidly as a sector, it was also subdividing into specialized segments. The engraving and lithography trades, whose processes excelled at reproducing creative imagery, colour, and decorative calligraphy, commanded the market for stationery, packaging, posters, promotional calendars and catalogue covers. The collection attests to the emergence of a new market, consumer goods, and a new industry, advertising. During this period, the role of the household as a centre of production was steadily weakened as its members became implicated in the labour market. As members became increasingly dependent on cash employment, household needs like clothing and food had to be met by purchasing goods. At the same time manufacturers, pressed by competition, continually sought both to expand their markets and reduce their costs through mass production. National markets for consumer goods thus emerged. The printing and publishing industry played a key role in this process through advertising and packaging.

Fonction

Sample print.

Technique

Represents the production processes in commercial engraving and lithography from the late 19th century through to the mid-20th century. The Frederick Martin tools and the gravure plates represent the craft of copper plate engraving in its traditional form. This consisted of cutting a design into the polished face of the plate, either exclusively with hand tools or with some degree of etching. After the plate was inked and thoroughly wiped, ink remained in these low lying areas. This ink was transferred to the paper when plate and paper were placed under pressure in a press (e.g. the Kelton press). The Frederick Martin tools include devices used both in engraving (gravers, scrapers and burnishers) and in etching (hand clamp). Engravers were assisted by the ruling machine to expedite laying down parallel lines and the pantograph (e.g. 1969.1286) to facilitate copying from a drawing, original plate, or master template. While no evidence of these devices is found among the Frederick Martin tools, it is likely that some of the plates were produced at least partly with them. Lithography is a process that does not rely on an elevated or recessed area to carry ink on the plate. Instead, in traditional lithography the image is applied to a polished, fine grained slab of limestone with a grease based ink. The stone is then dampened with water so that the stone can be repeatedly reinked without ink adhering to the nongreasy portions of the stone. The stones and early label specimens in the Art Alder collection represent this traditional form of lithography. The image was drawn on the stone directly with pen and grease pencil or by scratching through a gum coating to expose the ink absorbing stone in selected areas. Generally, these small stones carrying the original image were not placed in the press. Instead, images from several were applied to a final press stone by the use of transfer paper. It is this type of small, transfer stone that we are acquiring. In colour, or chromo-, lithography, a separate stone was required for each colour, with the sheet passing through the press several times to built up the final image. One of the most valuable items in the Art Alder acquisition is a progressive series of proofs for a multi-coloured label for the Niagara Falls Canning Co. By 1940, stone lithography and the transfer process had been superseded in most applications by offset lithography, in which the image carrier was a flexible metal plate wrapped around an impression cylinder. Image transfer to the plate by 1940 was largely by photographic means. Some of the label specimens we are acquiring clearly are the product of this photographic process.

Notes sur la région

Inconnu

Détails

Marques

None apparent.

Manque

Appears complete.

Fini

Cream coloured card stock with red, blue and black embossed image.

Décoration

Image of a house covered in snow.