Renseignements généraux

Nº de série

S/O

Nº de partie

1

Nombre total de parties

1

Ou

S/O

Brevets

S/O

Description générale

Synthetic, glass and metal.

Dimensions

Remarque : Cette information reflète la taille générale pour l’entreposage et ne représente pas nécessairement les véritables dimensions de l’objet.

Longueur

42,0 cm

Largeur

14,0 cm

Hauteur

13,3 cm

Épaisseur

S/O

Poids

S/O

Diamètre

S/O

Volume

S/O

Lexique

Groupe

Technologie médicale

Catégorie

Matériel médical

Sous-catégorie

S/O

Fabricant

Ou

Craig Pelling Modulevsky

Pays

Canada

État/province

Ontario

Ville

Ottawa

Contexte

Pays

Inconnu

État/province

Inconnu

Période

Inconnu

Canada

Taken from curatorial worksheet: This is the first prototype, DIY Twitter-Controlled microscope exhibited and used in an exhibition in Canada. Originally shown at the first Bioart exhibition in Canada: http://www.toxicitywinnipeg.com/ (Plug In Gallery, Winnipeg). It was built by Craig Bryan (@TheGufers), Daniel Modulevsky (@doc_bl00d) and Andrew Pelling (@pellinglab) to explore ways to get the public to participate in the work of a biological laboratory. Many of the components were -3_D printed in the pelling lab; others were recycled parts such as the simple computer camera. Here is a short blog on it and the other things they exhibited: http://www.pellinglab.net/toxicity The microscope flickr account: https://www.flickr.com/photos/slidescope/with/11206025194/ Twitter feed: https://twitter.com/LabSlideScope. Computer parts included Raspberry Pi and Arduino processers.

Fonction

To examine multiple biological samples at once from remote locations.

Technique

A microscope operated by anyone on the internet.

Notes sur la région

Inconnu

Détails

Marques

Handwritten numbers below reach light bulb reads from left to right "7 6 5 4 3 2 1". The same numbers are written on their corresponding wires. The numbers are handwritten on pieces of masking tape. Embossed print on power supply "3A 125[/]250VAC/ 50HZ 60 HZ".

Manque

Appears complete.

Fini

Multi-coloured synthetic blocks, fused together to form the microscope. Blocks are bright yellow, white, goldenrod and red in colour. There are two polished silver metal bars and a black synthetic ribbed belt. There are seven very small clear glass light bulbs. Each light bulb has a hand written number below it in black marker. There are green, orange, white and black wires attached to the microscope. There is a black synthetic and glass electronic eye with a green microchip attached to a white block which is in turn attached to the two metal rods.

Décoration

S/O